To open a Blackweb Bluetooth speaker, first power down the device completely and locate the plastic label on the back panel, which conceals a hidden screw. Using a 7/64th Allen key or Torx 2.5 screwdriver, remove this center screw and check edges for additional fasteners. Next, apply even pressure to lift the back cover away from the frame, inserting plastic wedges if needed. The housing separates easily once all fasteners are removed, revealing the internal battery compartment for further exploration.
Key Takeaways
- Peel the plastic label on the back panel to reveal the hidden center screw underneath.
- Use a 7/64th Allen key or Torx 2.5 screwdriver to remove the exposed center screw.
- Check the panel edges for any additional concealed fasteners and remove them all.
- Power down the device completely before gently lifting the back panel with even pressure.
- Once all fasteners are removed, the housing separates cleanly without adhesive to access the battery compartment.
Locating and Removing Hidden Screws
Accessing the interior of the Blackweb BWA18AA014 speaker begins with discovering the strategically concealed fasteners that secure its housing. The manufacturer has placed a hard plastic label on the back panel, which can be carefully peeled away without causing damage, revealing a hidden screw underneath. This design element is common in many bluetooth speakers to maintain aesthetic appeal while ensuring structural integrity.
Once the label is removed, users will find the concealed center screw in the back panel. This fastener requires either a 7/64th Allen key or a Torx 2.5 screwdriver for proper extraction. After removing this primary hidden screw, it’s crucial to inspect the panel edges and seams for any additional concealed fasteners. If the cover remains resistant to opening, carefully examine the entire perimeter for other hidden screws that may require removal.
This process highlights the importance of handling speakers with IP67 rating to appreciate their durability features in various environments.
Safely Separating the Speaker Housing
With all hidden fasteners now identified and removed, the next step involves carefully separating the housing of the Blackweb BWA18AA014 speaker. Before proceeding, make sure the device is fully powered down and disconnected from any power source to prevent electrical hazards during disassembly.
The back cover of this model typically detaches without significant resistance, as it uses no adhesive to secure the housing. Gently lift the back panel away from the main body using even pressure around the edges. If any resistance is encountered, pause immediately to check for overlooked screws or fasteners. When necessary, insert plastic wedges or pry tools between the seams to facilitate separation, taking care to avoid damaging internal components or circuit boards. The housing should separate cleanly when all fasteners have been properly removed.
Accessing the Internal Battery Compartment
Once all external fasteners have been removed from the Blackweb speaker housing, users can proceed to access the internal battery compartment, which houses the rechargeable lithium-ion power cell. Safety is paramount in this process, so turning off and unplugging the speaker before beginning is essential.
The back panel contains a hard plastic label that must be carefully removed to reveal a hidden center screw underneath. Users can go ahead and use either a 7/64th Allen key or a Torx 2.5 screwdriver to remove all screws from the panel. After all fasteners are out, the back cover lifts off easily, as this model doesn’t use adhesive to secure it. If resistance is encountered, technicians should check for additional hidden screws that may have been overlooked.
Frequently Asked Questions
How to Turn on Blackweb Bluetooth Speaker?
To turn on the Blackweb Bluetooth speaker, users must press and hold the Power Button for exactly 3 seconds. The indicator light will turn solid green, signaling the speaker is active and ready for connection.
How to Fix Bluetooth Speaker Not Working?
Bluetooth speaker issues often stem from battery problems. Begin troubleshooting by checking battery voltage with a multimeter. If below 12V, replace the battery following proper disassembly procedures. Reconnect wires correctly and test after reassembly.
How Do I Put My Bluetooth Speaker in Pairing Mode?
To enter pairing mode on a Bluetooth speaker, users typically press the power button for a few seconds. Pairing alternatives may include holding dedicated pairing buttons or combination button presses until indicator lights flash to signal discoverability.
Is There a Reset Button on a Bluetooth Speaker?
One might expect a dedicated reset savior, but Reset Myths abound. The Blackweb speaker doesn’t feature a physical reset button—instead, pressing + and – buttons simultaneously for 9 seconds performs a full system reset when needed.
